How To Set Up Time On Citizen Eco Drive

                                  Citizen World Fourth dimension Teaching Manual E784 Abbreviated instruction                                                

• This watch is solar-powered. Expose the punch to light and employ it sufficiently charged.
• To come across details of charging time, specifications and operations, refer to the pedagogy transmission: E784 didactics manual

Component identification

Setting the world time

This sentry tin can betoken the time around the world according to which of 26 time zones (offsets from UTC — Coordinated Universal Fourth dimension) is chosen.

1. Pull the crown out to position 1.
   The second hand points the time zone currently set.
2. Rotate the crown clockwise to select an surface area.
   The hr and minute easily start moving every bit yous finished to select an expanse.
   • Appointment indication also moves synchronously.
3. When the easily and indication stop, Push the crown in to position 0 to finish the procedure.

Table of time zones and representative places

• Countries or regions may change fourth dimension zones for diverse reasons.
• When using the spotter in an area not listed in the table, select an area name in the aforementioned fourth dimension zone.

Setting summer time

• The summer time setting (SMT ON/OFF) you lot prepare is practical to all the time zones of the world time.

i. Push the crown in to position 0.

two. Press and release the button.
The second mitt indicates the current summer fourth dimension setting.

• The watch returns to normal indication in 10 seconds without whatsoever operation during the steps below.

3. Rotate the crown to switch the summer time setting (SMT ON/OFF).

• Each time yous rotate the crown clockwise, the setting changes alternately.

iv. Press the push to finish the procedure.

Setting the time and calendar

• Before adjusting time and calendar, check the fourth dimension zone of the time and calendar to set and its summertime time status and adjust the setting of world time and that of summer fourth dimension (SMT ON/OFF) correctly.

Setting the time

1. Pull the crown out to position 2.
   The 2nd hand points to 0 seconds and stops.
   • Adjust the reference position earlier time and calendar adjustment if the second paw does not indicate 0 seconds following the steps of "Correcting the reference position".
2. Rotate the crown to prepare hour and minute.
   • When you rotate the crown speedily a few times, the hand/indication will move continuously. To terminate the rapid motion, rotate the crown in either direction.
   • Date indication also moves synchronously. Modify of date indication shows it just became AM.
   • Date indication does not change while moving the hands counterclockwise.
3. Push the crown in to position 0 in accordance with a reliable fourth dimension source to finish the procedure.

Setting the agenda

1. Push the crown in to position 0.
2. Printing and release the button.
   The second hand indicates the current summer fourth dimension setting.
   • Execute the adjacent step within 10 seconds.
3. Press and hold the button for 2 seconds or more than while the second hand indicates the summer fourth dimension setting.
   The 2d hand turns fully effectually and indicates the current year and calendar month setting.
   • Release the button when the second hand starts moving.
   • The watch returns to normal indication in xxx seconds without whatever operation during the steps below.
4. Rotate the crown clockwise to accommodate the year and month setting.
   · If you lot rotate the crown quickly a few times, the hand will move continuously. To finish the rapid movement, rotate the crown clockwise.
5. Rotate the crown counterclockwise to set up the date indication.
6. Press the push button to finish the process.

Correcting the reference position

Suit the reference position when the second manus does non point 0 seconds while the crown is in position 2.

Correct reference positions:

• Hour, minute and 2d hands: 0 hour 00 minute 0 2nd
• Date indication: "1" ON
• Do not suit the reference position when the lookout indicates xi:50 PM – 12:10 AM. Otherwise, the date indication may alter incorrectly.

1. Pull the crown out to position 2.
2. Press and release the button.
   All Reset is executed.
3. Rotate the crown to set the hr and infinitesimal hands to 0 hours 00 minutes.
   • If you rotate the crown chop-chop a few times, the manus volition move continuously. To stop the rapid movement, rotate the crown in either direction.
4. Push the crown in to position 1.
5. Rotate the crown clockwise to set up the 2nd paw to 0 second.
   • If you rotate the crown quickly a few times, the hand will move continuously. To end the rapid move, rotate the crown clockwise.
6. Rotate the crown counterclockwise to set the date indication to "1".
   • When you rotate the crown quickly a few times, the indication volition move continuously. To stop the rapid movement, rotate the crown counterclockwise.
   • Rotate the crown while pressing and holding the button to conform the position finely.
7. Button the crown in to position 0 to finish the procedure.
   The reference position is updated and the second mitt starts moving.
   • Arrange the time and calendar after that.

Documents / Resources

Source: https://manuals.plus/citizen/world-time-manual

Share this post